| Quantity: | |
|---|---|
Dongfeng 10-ton 4*2 on-board crane adopts Xugong SQ10SK3Q four-arm straight-arm crane, which can lift up to 10 tons. The maximum lifting capacity of the crane arm can be extended to 12 meters and raised to 14 meters. After fully extended, the crane can bear 1.5 tons of goods.
With front and rear support legs to operate the work platform.
| Basic technical status | |
| engine | Yuchai YC6J210-33 |
| Gearbox | Mechanical Manual eight-speed |
| Frame | 280mm(three layers of reinforcement) |
| Front Axle/ Rear Axle | 5T/13T |
| Cab | Dongfeng One and a half in a row, flat-head |
| tyre | 10.00R20（6+1） |
| suspension | leaf spring7/8+10 |
| Electrical appliance | 24V circuit system |
| Basic parameter | ||
| Size parameters | Overall Dimensions (long × width × height) (mm) | 9665× 2515× 3850mm(The height is the height from the ground at the highest point when the crane is stowed) |
Chassis size | 9395× 2230× 2980mm | |
Container size | 6200×2300×900mm | |
Curb Weight(kg) | 11900kg | |
| total mass(kg) | 18000kg | |
| Wheelbase (mm) | 5000mm | |
| Front hanging/rear hanging | 1450/3215mm | |
| wheelspan | 1955/1862mm | |
| maximum torque | 710N·m | |
| Performance parameters | Power (KW) | 156kw |
Displacement (L) | 6.494L | |
| The volume of the fuel tank (L) | 300L | |
| maximum speed (km/h) | ≥90km/h | |
Note: This configuration is for reference only, and the specific situation is based on the real car.
Dongfeng 10-ton 4*2 on-board crane adopts Xugong SQ10SK3Q four-arm straight-arm crane, which can lift up to 10 tons. The maximum lifting capacity of the crane arm can be extended to 12 meters and raised to 14 meters. After fully extended, the crane can bear 1.5 tons of goods.
With front and rear support legs to operate the work platform.
| Basic technical status | |
| engine | Yuchai YC6J210-33 |
| Gearbox | Mechanical Manual eight-speed |
| Frame | 280mm(three layers of reinforcement) |
| Front Axle/ Rear Axle | 5T/13T |
| Cab | Dongfeng One and a half in a row, flat-head |
| tyre | 10.00R20（6+1） |
| suspension | leaf spring7/8+10 |
| Electrical appliance | 24V circuit system |
| Basic parameter | ||
| Size parameters | Overall Dimensions (long × width × height) (mm) | 9665× 2515× 3850mm(The height is the height from the ground at the highest point when the crane is stowed) |
Chassis size | 9395× 2230× 2980mm | |
Container size | 6200×2300×900mm | |
Curb Weight(kg) | 11900kg | |
| total mass(kg) | 18000kg | |
| Wheelbase (mm) | 5000mm | |
| Front hanging/rear hanging | 1450/3215mm | |
| wheelspan | 1955/1862mm | |
| maximum torque | 710N·m | |
| Performance parameters | Power (KW) | 156kw |
Displacement (L) | 6.494L | |
| The volume of the fuel tank (L) | 300L | |
| maximum speed (km/h) | ≥90km/h | |
Note: This configuration is for reference only, and the specific situation is based on the real car.
