Views: 0 Author: Site Editor Publish Time: 2021-07-15 Origin: Site
Check tyre
Regular check tyre There is damage, such as abnormal wear, cutting, cracking, and drums. Any external embedding that may penetrate the body should be removed, which may seriously damage the fetus. Correct inflation guarantee:
Better direction stability.
The exact and softness of the turn.
- Better fuel consumption.
- tyre Extended service life.
Regular examination of tyre, the pressure check is performed in the tyre cold state.
Incorrect tyre air pressure in the thermal state.
Notice
Insurance is prone to tyre The temperature is not rising normally, which may result in tyre abnormally damaged, thus report (possibly enter tyre).
Very impact, jump on pockets, accidental disorders on collision may damage tyre, and front wheel positioning can also be damaged, affecting travel reliability, and tyre rapidly decline.
suggestion
After a serious influence, even after driving for a long time, it should check the wheel positioning parameters. Because the bad path may damage tyre, even if it is not obvious, it will expose in the future. When replacing tyre, the tyre of the recommended specification is selected.
tyre
The punctured tyre is removed from the vehicle, checking if there is another damage, may be necessary to take a break to avoid damage to the structure. The repair of tyre can only be done by the tyre disassembly and dynamic balancer.
Wear signs
Wear Sign Find Method:
There are multiple \\\"tw1 \\\" tags on the side of the shoulder, first, find any logo.
2. On each tyre tread, wear logo can be found in tyre of \\\"tw1 \\\" logo. The height of the wear logging is basically 2.5mm, where the number of positional wear signs of the week is 1 to 4 (the number of different manufacturers is different). At present, there are 4 wear signs in the 4 wear tread, and the triangle tyre temperature has 3 wear signs, and the double star tyre The pedal has a wear to worn in a wear position.
Left: Guizhou tyre Spring wear logo
Notice
After wearing tyre After wear, it should be replaced at the same time.
tyre Internal support maintenance
1. The maintenance range supported by car tyre is as follows:
- Check if the support connection bolts are loose; - Check whether the transfer is transferred;
- Check if the nozzle is leaking;
- Check if you need to add or replace the grease; - Vehicle balance detection.
2. To ensure that the appearance of the car tyre is not affected by the appearance and service life of the car, pay attention to transportation or storage pay attention to:
- Gently touch and avoid collision with sharp or sharp items;
- Avoid direct sunlight, away from high temperature environment or object;
- Do not recommend contact with chemical solvents.
tyre maintenance and transposition
Notice
The front wheel assembly of the automobile factory has been balanced, but before tyre wear, the wheel assembly balance is sometimes needed. If you think the vibration of the steering wheel during driving, use an abnormality such as a rumor, please check the wheel assembly in a timely manner.
In addition to checking tyre, the correct wheel positioning helps to reduce tread wear. If you find tyre, there is no uniformity, check the position of the wheel and adjust the wheel positioning state in time.
To extend tyre, use tyre is uniform, and the tyre position should be interposed every 6,000 kilometers. Each time you turn your position, you should make an illustration.
This article is transferred to: {[1] Occupational Vehicle Co., Ltd. - \\\"CSK162 Protective Car Usage Maintenance Manual \\\"
