Views: 0 Author: Site Editor Publish Time: 2021-06-28 Origin: Site
Support
Before installing the car, the vehicle first checks if the vehicle's wheel, suspension, and steering system are normal. The specific examination is as follows:
1) Whether the rim is crack or deformed
2) tyre Defining degradation, scratching, shrinking, rolling, deformation, partition, and severe wear
3) Whether the components of the suspension and steering system are loose or deformed
4) Then take the road test and check if the steering wheel has jitter in high-speed driving. If there is jitter, you must perform a wheel balance correction or four-wheel positioning correction. After the troubleshooting, the support can be installed.
After installing the vehicle tyre, the vehicle balance should be corrected in time. Therefore, the car driver must abide by the following.
1) The air pressure must be specified according to tyre, and tyre is not allowed
2) When the car occurs, the driver must keep calm, try not to be urgent to brake, should steadily stabilize and slow down.
3) When the car is in front wheel tyre, the car will weaken or lose automatic return function, and the car will weaken or lose automatic return function. The driver needs to control a stable steering wheel.
4) After the car tyre After the puncture or leak, the vehicle should not take the high speed (maximum speed <50km / h), especially on the high-speed and low-speed bad roads, should be driven at a low speed, and will be stored in safe as soon as possible Local [17]}. In special cases, it can continue to travel, and the distances that continue to travel are different from the road surface conditions, load size and speed, but will cause a certain degree of damage to the support, {[17] or rim to shorten the life of reuse. Even scrapped.
5) tyre After the car tyre is supported due to puncture or leak, tyre must be disassembled and the car tyre support is supported, and it is maintained or replaced according to the specific situation. In particular, pay attention to whether the nozzle is damaged.
6) After hitting the support, the designated after-sales service point should be disassembled, check the support and rim, keep adjustment or replacement according to the specific situation, and double the vehicle rotation and balance detection.
7) Installing the car tyre The support for support is usually 30,000 kilometers. Even if there is no abnormality, labor or sound is abnormal, you must also check after-sales service socket.
8) After installing the bracket, if the vehicle is jitter, the vehicle is excluded (tyre positioning parameters change, tyre is uneven, the rotation system is loose, etc.) should be taken after-sales service outlet check. If the steering wheel shake cannot be excluded, four-wheel positioning check, correction, then perform balance detection until the jitter is eliminated, otherwise it will accelerate tyre wear.
9) The maintenance range supported by the car tyre is as follows:
- Check if the connection bolt is loose
- Check if the nozzle is leaking
- Check if you need to add or change lubricant
- Vehicle balance detection
10) In order to ensure the appearance of the car tyre supported and the service life is not affected, and should pay attention to transportation or storage:
- Pick up and avoid colliding with sharp or sharp items
- Avoid direct sunlight, away from high temperature environment or object
- Should not contact the chemical solvent
This article transfer: Dongfeng City Special Motor Co., Ltd. - \\\"CSK162 Protection Bureau User Maintenance Manual (Test) \\\