Views: 7 Author: Site Editor Publish Time: 2022-03-02 Origin: Site
Engine start
1) Check the plane of the engine lubricating oil and coolant
2) View the amount of storage of the fuel tank
It is strictly forbidden to work in the absence of airless laminator;
When the new car is used in the first time and after a long parking, there is air in the fuel road. It is necessary to use the oil pump to manipulate the oil to exclude the air in the oil supply system;
Note: The method of dragging the engine should not be used to exclude the air within the oil supply system.
3) Confirm that the transmission joystick is in a neutral position;
4) Turn on the power switch, turn the key switch to the amount of \"i \", and check if each alert indicator is light;
5) Stepping the accelerator pedal to the intermediate position, the clutch pedal step, and turn the key to the start position, start the engine;
6) Relax immediately after the engine is started; and slowly relax the accelerator pedal, transition to idle operation position, be sure to observe oil pressure in 15 seconds;
Dongfeng EQ2082 modified fuse
7) Adjust the engine idle adjustment knob. Make the engine speed to operate at a high idle speed so that the engine runs up; after completing the temperature rise, adjust the engine idle to normal idle speed, 650 ~ 850R / min
Note: Each time the motion of the engine is not allowed for more than 5 seconds. Surrounding the starter will consume too much in the continuation of the starter, so that the battery life of the battery is greatly shortened. If the engine is not started once, after 30 seconds, then restart the start, that is, at least 30 seconds at least 30 seconds each time.
Dongfeng EQ2082 freight box display
This article is reproduced from: Dongfeng car company - Dongfeng EQ2082E6D off-road vehicle concise instruction manual