Views: 7 Author: Site Editor Publish Time: 2022-02-22 Origin: Site
Structural explanation and operation
dash board
1. Speed Miles 2. Air Pressure Table 3. Fuel Table 4. Engine Water Temperature Table 5. Oil Pressure Table 6. Engine Speedometer 7. Current Table 8. Indicator LampVehicle speed mileage
Vehicle speed mileage table
Table of the pointer finger per hour (km / h)
The mileage accumulates the running distance in kilometers.
2. Air pressure gauge
Double needle air pressure gauge. The white pointer is the air pressure value indicating the main storage pump (rear bridge), and the red pointer indicates the braking pressure value of the rear axle.
The indication of the air pressure gauge is from 0 to 10 x 100kpao in the red region, the pointer is in the red area, and the vehicle is prohibited from starting, and the vehicle can start.
3. Fuel gauge
There are three scales (1, 1/2 and 0) on the dial, 1 means the fuel tank filled, and when the indication is close to \"0 \", it means that the fuel tank oil is used, and the cleaning fuel should be added as soon as possible to avoid fuel. The pipeline enters air due to no fuel, affecting normal driving.
4. Engine water temperature meter
The temperature used to indicate the engine coolant.
When the car is running normally, the engine water temperature is generally between 85-90 ° C, and if it is more than 95 ° C for a long time, it should be closed. When the water temperature is below 50 ° C, the engine should be avoided at high speed and large load operation.
5. Oil pressure gauge
It is used to indicate the oil pressure of the engine lubricating oil.
This article is reproduced from: Dongfeng car company - Dongfeng EQ2082E6D off-road vehicle concise instruction manual
