Dongfeng EQ2102 Series Off-road Motor User Manual - Structure and Operation - Air Dryer Heating Indicator

Air dryer heating indicator

When the air dryer heater switch is on the ON position, the indicator light is on, indicating that the heating circuit of the dryer is turned on.

Note:

When the outside atmospheric temperature is lower than 8 ° C, it is necessary to turn on the heater of the dryer.

Intake preheating indicator

Indicates whether the air heater (engine intake preheating device) is passed through a current. When the key switch is on the position of the \"On\" file, the indicator is on, indicating that the air heater begins to warm up. When the indicator flashes, the buzzer can start the engine. Please refer to the intake preheating start operation on page 44 for the use of air preheating.

Charging failure alarm light

When the key switch is in the position of the ON, the alarm light is on. When the engine starts charging the battery, the lamp is turned off. When the charging system is stopped during the driving process, the lamp is lit.

Note:

It is strictly for a long time to drive during the state of the indicator.

Long distance control indicator

1. Splitter high-end indicator

2, the mandatory low-end indicator

3, striker correct indicator

4, striker reverse indicator

5, front bridge access indicator

6, full power output indicator (optional)

7. Battery insulation indicator (optional)

switch

1, power switch

2, fog light switch

3, gas, electric horn conversion switch

4, danger alarm light switch

5, the main, the vice tank oil display conversion switch

6, long distance control switch

7, air dryer switch

This article is reproduced from: Dongfeng Motor Corporation -Dongfeng EQ2102 / 2102G Series Off-road Motor User Manual