Dongfeng EQ2102 Series Off-road Motor User Manual - Structure and Operation - Air Dryer Heating Switch

Air dryer heating switch

This switch is a heater current control switch for a dryer. When the switch is on, the dryer heating indicator lights up.

When the vehicle is used at ambient temperature below 8 ° C, the dryer heating switch should be turned on to prevent line and valve.

Steam

1, exhaust brake switch

2, windshield wiper and scrubber switch

3, speaker switch

4, key switch

5, light composite switch

Exhaust brake switch

1. Dial the switch joystick to the open position.

The exhaust brake indicator lights up. When the foot is moved from the accelerator pedal and the clutch pedal, the exhaust brake works. Stepping on the accelerator pedal or clutch pedal, the exhaust brake is automatically released.

2. After the switch joystick is dial forward to the closed position, the exhaust brake stops working, and the exhaust brake indicator is turned off.

1. The switch is turned off 2, the switch is opened

Windshield wiper and scrubber switch

1, the wiper stops

2, intermittent song

3, low speed continuous water

4, high-speed file continuous water

5. Lift the end of the scrubber joystick, the rinsing liquid is continuously spreading on the glass

Note:

1. The wiper is used with the scrubber to prevent scratching glass.

2. It is strictly forbidden to use a scrubber when there is no washing liquid.

Trumpet switch

Select the use of electric horn or gas speakers as needed.

1, speaker button 2, air electric horn conversion switch

Key switch

1.key (key): The key can only be inserted and unplugged at the KFY.

2.off (disconnect): When the key is in the OFF position, the engine stops running the key from the ON position to the OFF position.

3.Acc (Subsidiary Part): When the engine is not running, use any attachments (such as wiper, etc.), and when the key is screwed from the ON to the ACC position, the engine stops running.

4. On: When the key is screwed to the ON position, it will work properly after the engine is started. Do not scift your keys to other locations at runtime.

5.Start: Screw the key to the START position to start the engine. After the hand is loose, the key will automatically bounce back to the ON position.

Note:

When the engine is in operation, it is strictly forbidden to screw the key to the START position, otherwise the starter is damaged.

This article is reproduced from: Dongfeng Automotive - \"Dongfeng EQ2102 / 2102G Series Off-road Motor User Manual\"