Views: 4 Author: Site Editor Publish Time: 2021-07-29 Origin: Site
1, high-light indicator DC
2, steering signal indicator
3, the air pressure is too low alarm
4, oil pressure is too low alarm
5, dirty brake indicator
6, cooling liquid surface and overheating indicator
7, exhaust brake indicator
8, air dryer heating indicator
9, intake preheating indicator
10, charging failure alarm light
11, air filter blocking alarm light
High beam indicator
When the vehicle headlights use a remote light, the lamp is light at the same time. This light is also bright when the lamp is operated.
Steering signal indicator
The lamp is used to indicate the operation of the steering lamp, and when the turning lamp is blown, the lamp rapidly flashes the alarm.
Pneumatic low alarm light
If the air pressure in the gas cylinder drops to the specified limit, the lamp is lit, and the buzzer is surrounded by the alarm. When the parking brake control valve joystick is pulled to the brake position, the buzzer stops.
This article is reproduced from: Dongfeng Automotive - \"Dongfeng EQ2102 / 2102G Series Off-road Motor User Manual\"