Dongfeng EQ2102 Series Off-road Motor User Manual - Structure and Operation - Light Composite Switch

Light compact switch

This switch is a front small lamp, a backlight, a front headlight, instrument light, license lamp, overtaking light, and variable light, a combination of signal switch.

Light switch

When the tip knob of the composite switch operator is twisted, you can light the light:

0 Location: Close

1 Location: front small light, backlight, license, instrument light

2 Location: front headlights, front tighteners, post small, license plate, instrument light

转Signal light

When the joystick is dial, the left turns the lamp point. When the joystick is dial, the right steering lamp lights up.

(Illustration solid arrow)

Variable switches and superhighlights

When the car at night, it is necessary to use the forward opening of the headlight back to move back to the composite switch, and the focus of near-light and high beam. Press the joystick from the low-light position, and the light of the lamp is always lit. The vehicle is normal, regardless of any other lighting use, the joystick is lifted to the highest, the overload light is lit (the illustration is solid arrow).

Intake preheating damper and switch

The intake preheating is provided for the convenience of the engine at a low temperature environment (5 ° C to -41 ° C). See page 44 for intake preheating operation methods.

1, intake preheating damper 2, intake preheating switch

Engine idle adjustment knob

The engine idle operation is generally within 650 ~ 850R / min.

When the engine idle is too high or too low, the engine idle is adjusted using the knob.

Self-locking switch

Air defense light switches, striper switches, front bridge switches and stroke switches are self-lock switches, and when manipulating these switches, the buttons on the handle must be rotated.

Remote operation Specific steps See page 45 Matters, PRT and front axles manipulation and use.

1, button

1, air defense light switch 3, front bridge switch

2. Splitter switch 4, striker switch

Air defense light switch

1, non-air defense lamp

2, before, after air defense light and brake light

3, only after the air defense light and brake light

Splitter switch

1, the mandatory is in low gear

2, the mandatory is in the idle

3, the mandatory is at a high level

Front bridge access switch

1, full power output (optional)

2, front bridge driver is disengaged

3, front bridge driver access

Striker switch

1. Practice output, winch drum, hire wrap wire rope

2, idle

3. Practice output. Winch drum relax wire rope

This article is reproduced from: Dongfeng Automotive -\"Dongfeng EQ2102 / 2102G Series Off-road Motor User Manual\"