Views: 6 Author: Site Editor Publish Time: 2021-08-03 Origin: Site
Car connection operation
EQ2102, the EQ2102G trailer brake connection device is mounted on the back beam of the frame, and it is arranged in Visual -a-050.
Double Tube Transfer Production (Control Connector) Double Tube Inflatable (Supply Source Connector Connector) Single Turning System (Automatic Dynamic Switch)
1. The trailer connection operation should be performed on the tablet and turn the hand control valve to the locked position, the spring brake gas chamber opens in the normal state position (see page 22) and plug in the wheel with a triangular pad.
2. Adjust the height of the trailer's traction ring is equal to the height of the traction hook.
3, pick up the traction hook and the traction ring.
4. Connect the trailer's cable connector to the tractor socket.
5. Connect the hose joint to the output connector of the tractor.
notes:
1. Unable to receive a hose joint.
2. When connecting to the old artillery (single cycle brake), use the trailer connection connector to replace the original connector on the old artillery in the attachment.
6. Separation is around before pulling the lead.
7. Start the engine to increase the air pressure in the gas tube to a predetermined pressure.
8. Close the hand control valve to alleviate the train.
9. Step on the brake pedal to confirm whether the driver's driver is working properly.
10. Confirm that the driver works normally.
Trailer separation operation
1. Scroll the parking brake handle to the locked position and with a triangular pad trailer.
2. Turn off the brake separation switch.
3. Remove the power transfer cable and hose. After being detached, the trailer is automatically braked.
4, open the traction hook, raise the traction ring from the traction hook. Let the tractor Xu Xu move forward and separated from the trailer.
This article reprints from the following products: Dongfeng car - \\\"Dongfeng EQ2102 / 2102G series Vietnam Motor User Manual \\\"
