Dongfeng EQ2102 Series Vietnam Motor Manual - Maintenance and Adjustment - Auxiliary Power Start

Auxiliary power supply start

Due to the powerless battery power, the engine is difficult to start auxiliary power supply for the start of the vehicle. Connection program:

1. Whether the engine has a good battery vehicle flameout.

One end of the stretcher cable (red) is connected to a battery-free positive electrode terminal and the other end is connected to the positive electrode terminal of the battery. Another disturbance cable (black) of the other end is connected to the negative terminal of the battery, and the other end is connected to the chassis frame equipped with the battery, and must be away from the battery.

3. After strengthening the cable, start the vehicle engine without the battery, for example, when the temperature is too low, the engine of the normal vehicle takes a few minutes, then the engine of the actuator vehicle is initiated.

4. After the engine is started, the cable is removed in a relative line.

1, there is battery

2, non-battery

3, frame

Check tyre Air pressure and tread

1. Check if the air pressure meets the designated requirements, it is not enough to expand.

2. Check if tyre is hung in the tread, it will be removed from foreign matter.

3. Check the depth of the tread pattern.

This article reprints from the following products: Dongfeng car - \\\"Dongfeng EQ2102 / 2102G series Vietnam Motor User Manual \\\"