Views: 1 Author: Site Editor Publish Time: 2021-08-13 Origin: Site
Battery inspection and maintenance
When using maintenance battery check, the power should be turned off.
Check the surface of the electrolyte liquid
Electrolyte liquids are required when every 4,000 km is required. The normal liquid surface should be higher than the polar plate 15 to 20 mm. If the liquid surface is low, distilled water should be filled, and the filled water is filled for half an hour, and the added distilled water is mixed with the original electrolyte phase.
1, electrolyte 2, board
Check the proportion of electric power
Each 12,000km, the specific gravity of the electrolyte is needed. The proportion of the specific gravity is introduced, and the normal electrolyte is between 1.26 to 1.265 (the electrolytic solution temperature is 20 ° C), and if the weight is less than 1.22, the battery must be rechargeable.
1, float 2, horizontal reading 3, electrolyte
fuse
When replacing the fuse, you need to confirm the load of the fusion line used. If the newly replaced fuse is easily burned, the reason why and fixes must be found. If you are unable to troubleshoot, please contact the nearest Dongfeng Motor Company Technology Service Center (station).
notes:
1. The power must be turned off before replacing the fuse.
2. Do not use normal electric wires or other load fuses.
This article reprints from the following products: Dongfeng car - \\\"Dongfeng EQ2102 / 2102G series Vietnam Motor User Manual \\\"