Dongfeng EQ2102 Series Vietnam Motor User Manual - Startup Method for Starting and Driving - Caben

Startup method when you leave the cab

1. The parking brake handle turns to the brake position and then turns the key to the \"\\\" position.

2. The gear joystick is in the neutral position. Put the wheel with a triangle.

3. Turn drive by the prescribed secure operation program (see page 30).

4. Press the engine start button, the engine can start.

5. When the engine is stopped, it must be used to use the engine to close the odor. After the engine is closed, the packer is turned from \\\"OFF \ \\ \\\" to \\\"OFF \\\".

warn:

1. Do not touch the gear joystick when the engine runs in the case of the wiring.

2. When the engine is running, the cab is strictly prohibited.

Engine use precaution

To ensure proper use of the EQB series engine, pay attention to the following:

1. In order to ensure the normal combustion of the engine, the air in the fuel system should be discharged when it is difficult.

2. The basic engine ensures that the cold start temperature is -10 ° C, which is above 2000 meters; below -10 ° C, the engine must be selected, and the main climate is suitable for lubricating oil, fuel and antifreeze. conditions of.

3. Users must not adjust any components of the high pressure oil pump, especially high idle screws to avoid severe damage to the engine and automotive speed.

4. To ensure that steam leads to exhaust of the tube and gas to ensure the sealing of the cooling line, prevent the system from inhaling of air, resulting in a reduction in flow. Carefully note that the coolant temperature cannot exceed the limit. If the limit is exceeded, it should be in the city center.

5. Maintenance should be maintained in strict accordance with the specification.

This article reprints from the following products: Dongfeng car - \\\"Dongfeng EQ2102 / 2102G series Vietnam Motor User Manual \\\"