Views: 6 Author: Site Editor Publish Time: 2021-07-30 Origin: Site
Air dryer heating indicator
When the air dryer heater switch is turned on, the indicator light is on, indicating that the heating circuit of the dryer is turned on.
notes:
When the external atmospheric temperature is below 8 ° C, it is necessary to open the heater of the desiccator.
Intance preheating indicator
Indicates whether an air heater (engine intake preheating device) is passed through a current. When the key switch is located in the \\\"on \\\" file, the indicator lights up, indicating that the air heater begins to warm up. When the indicator flashes, the buzzer can start the engine. See the intake preheating start operation on page 44 to use air to warm up.
Charging fault alarm light
When the key switch is located on the ON position, the alarm light is on. When the engine starts a rechargeable battery, the lamp is closed. When the charging system is stopped during driving, the light is on.
notes:
In the indicator state, it is strictly driving.
Long-distance control indicator
Separator high-end indicator
2, mandatory low-end indicator
3, forward correct indicator
4, striker reverse indicator
5, front bridge pick-up indicator
6, all power output indicator (optional)
7. Battery insulation indicator (optional)
change
1, power switch
2, fog light switch
3, gas, electric horn conversion switch
4, dangerous alarm light switch
5, main, vice tank oil display conversion switch
6, long distance control switch
7, air dryer switch
This article is reproduced by: DongfengDongfeng EQ2102 / 2102G Series Vietnam Motor User Manual
