Views: 2 Author: Site Editor Publish Time: 2021-07-30 Origin: Site
change
When the switch is pressed, open the full vehicle power source, then press the switch to disconnect the full vehicle power. When maintaining and maintaining a vehicle circuit system to protect other electrical equipment, it should be disconnected.
1. Disconnect the power 2, the power is turned on
notes:
1. When the engine is running, the power switch is strictly prohibited.
2. When departure, you must turn off the power switch.
Fog light switch
When driving in a dense fog, press the switch, and the front fog lamp is lit.
Gas, electric horn conversion switch
The vehicle operates on the way, you can choose to use the electric horn or air trumpet.
Danger alarm light switch
When the dangerous alarm light switch is turned on, the forward and right turn signal lights up, flashes, and remind other vehicles.
1. Dangerous alarm lights in 2, close 3, parking lights
Main, vice tank oil display conversion switch
The main and the secondary tank oil are represented by a fuel scale, and the fuel table can be displayed in the main tank by the conversion switch. View page 24 via tubes.
notes:
First use the fuel in the main tank, and then use the fuel of the void can. Otherwise the fuel will overflow from the main can.
Long distance control switch
The switch is used to control the manipulation of the separator, front bridge, calibration, etc., that is, remote manipulation of the dispenser, front bridge, and the stroke, etc., and the like can be achieved after pressing the switch. See the operation and use of the manipulator, stripping machine and front bridge on page 45.
This article is reproduced by: DongfengDongfeng EQ2102 / 2102G Series Vietnam Motor User Manual
