Views: 5 Author: Site Editor Publish Time: 2021-08-03 Origin: Site
Special equipment
Spars and pulp (optional)
Winches and pulleys can be saved, rescued, or other uses at the time of necessary.
0. Separation 1. Art
Wire rope
1. Give the pipe to \\\"1 \\\" position, engage the drum.
2. Start the engine and start the engine at the gear position.
3. Place the clutch pedal and turn the stroke switch to the location of \"front \\\".
4. Slowly release the clutch pedal and the wire rope can be released. If the hit needle is switched in the \\\"empty \\\" position, and the drum is placed in the \\\"separation \\\" position, it is also possible to completely pull out the wire rope.
1. Practice output, winch drum, rent steel wire
2, idle
3, stroke output, winch drum relax wire rope
notes:
Before using, you must check if the wire rope is complete, reliable, and strictly prohibit the use of a broken line.
When the wire rope is released, the throttle is not too large, and the other person must slow down the wire rope to the tractor and the hook is connected.
This article reprints from the following products: Dongfeng car - \\\"Dongfeng EQ2102 / 2102G series Vietnam Motor User Manual \\\"