Views: 0 Author: Site Editor Publish Time: 2021-09-30 Origin: Site
Section 8 winch
How to use a winch
Steps On the clutch pedal and put the transmission rod into the neutral position. For example, when dragging other vehicles, the car should brake with hand, if needed, cover the wheel
Clutch sleeve engaging winch
Start engine
Remote power takeoff
Loosen the clutch pedal, separate the drum clutch sleeve and release the wire rope at this time while pulling the steel rope out of the front portion of the traction object by hand. (The steel rope can be pulled out by hand, and it cannot be meshed at this time)
Place the power outlet rod in an intermediate (neutral) position.
Depression clutch pedal, geometric power takeoff forward.
At the same time, the clutch pedal and step on the accelerator pedal are released, so that the engine speed is in the range of 1000 ~ 1200 rpm, and the winding steel rope begins toward.
After traction, you must step on the clutch pedal, put the power outlet rod into the intermediate position, and lock it with the lock plate to prevent the power supply from automatically engaging the gear when driving.
2. Strictly prohibit the following
Pull the car with a steel rope without combining a winch mechanism
Winch meshing the reverse gear of the car while working
When the winch is working, standing between the steel rope or the steel rope to arrange wire rope windings
Replace the safety pin with bolts or other components
When the power take-off lever is placed in an intermediate (neutral) position, it does not need to be locked by the lock.
This article reprints from the following products: Dongfeng Truck Company Heavy Vehicle Factory - Military Dongfeng off-road vehicle Adjustment and Maintenance Manual
