Views: 15 Author: Site Editor Publish Time: 2021-09-22 Origin: Site
Section 3, drive shaft
When the car is driving, due to the complex road situation, the transmission system has a huge torque, alternating load and impact, which is easy to generate severe wear, resulting in an abnormal sound or swinging of the vehicle during driving.
The common fault of the transmission system is as follows:
Fault mode | cause of issue | Troubleshooting |
Transmission axis vibration | Transmission axes are not assembled by tagging Transmission shaft axis bending Transmission axes are not active balance or balanced blocks The EQ2081E series drive shaft supports insufficient fastening force or positioning pin assembly is not in place. Transmission shaft connection bolts Song | Replace the tag assembly Do the balance or replacement Tighten or re-assemble according to technical requirements Tighten according to technical requirements |
The drive shaft sounds | Ultra-wear, large bearing gap EQ2081E series intermediate support of lack of grease, bearing excessive grinding, gap | replace Filling grease or replace the intermediate support |
This article is reproduced from: Dongfeng Truck Corporation Heavy Car Factory - \"Military Dongfeng off-road vehicle Adjustment and Maintenance Manual\"
