Views: 1 Author: Site Editor Publish Time: 2021-10-07 Origin: Site
First part overview
off-road vehicle The cab is mainly divided into two categories: long head Cab and flat head Cab: These two types of cabs have the following structural form:
Model | Structure of the cab | Connection between the cab and the frame |
EQ2102N. | Double-seat seat, panoramic curved front windshield, four doors, five passengers, all metal welding structures, heating air, manual hydraulic flip | Four-point suspension, two points and back, rear suspension Central lock hook with safety hook |
EQ2102G. | Sleep in a row. Panoramic curved front windshield, three passengers, all metal welding structures, sleep berth, warm air, torsional rod turning mechanism | |
EQ2081. | Single line, three occupants, all metal welding structures, two non-open front windshields, warm air | The body consists of two parts: the cab and the former dietary accessories. A six-point elastic suspension method is used by bolts and is fixed on the chassis. |
EQ2100E. | ||
EQ2082 |
Write and install the second part of the cab assembly (take EQ2102 as an example)
1. Fix the front wheel to prevent the vehicle from moving before the cab is removed.
2. Put down the anti-collision framework, otherwise the cab will damage.
3. When disassembling oil and water pipe, use the container to hold the oil and water.
4. Confirm that all connections to other components have been disconnected before lifting the cab.
5. During the promotion, do not collide with the engine and other components.
6. Before installing the bracket cover of the cab, be sure to adjust the relative gap front suspension of the cab, and tighten torque is 90n.m.
This article is reprinted from the following: Dongfeng Truck Company Heavy Vehicle Factory - \\\"Military Dongfeng off-road vehicle Adjustment and Maintenance Manual \\\