Views: 5 Author: Site Editor Publish Time: 2021-10-07 Origin: Site
First section outline
off-road vehicle The cab is mainly divided into two categories: long head Cab and flat head Cab: These two types of cab have the following structures:
Model | Cab structure form | Cab and frame connection method |
EQ2102N | Double-row, all the windows in front of the windows, four, occupant five, all metal welding structure, with warm air, manual hydraulic flip | Suspended in four o'clock, two points before and after, rear suspension set the center lock hook with safety hook |
EQ2102G | A row of lying. The windows of the panorama of the windows, three occupants, all metal welding structures, sleeper, warm air, torsion bar flip mechanism | |
EQ2081 | Single row, occupant three, full metal welding structure, two unknobable front wind windows glass, warm air | The body is composed of two parts of the cab and the front of the car. |
EQ2100E | ||
EQ2082 |
The second cab assembly is removed and installed (take EQ2102 as an example)
1. When the cab is removed, the front and rear wheels should be fixed to prevent the vehicle from moving.
2, put down the anti-hitting rack, otherwise the cab will be crowded.
3, when the oil is removed, the water pipe is used to oil, water.
4. Before lifting the cab, confirming that the connection to other components has been disconnected.
5. During the lifting process, the engine and other components are not collided.
6. Install the cab front suspension before the bracket cover, confirm the adjustment of the cab front suspension relative gap, tighten torque is 90n.m
This article is reproduced from: Dongfeng Truck Corporation Heavy Car Factory - \"Military Dongfeng off-road vehicle Adjustment and Maintenance Manual\"
