For Dongfeng car company (hereinafter referred to as Dongfeng) provided by the second -class chassis provided by the company for functional structural installation, it does not involve any assembly replacement.
Compared with traditional industrial and mining cars, Dongfeng Giant has obvious advantages
Today, I will introduce the DFH3180B2 dump truck, let's take a look.
The use of new cars in the vehicle will be 1000 ~ 2500km, but the new car can only be used normally after driving 2500km, because only it's driving can reach the maximum, otherwise it will be insufficient due to power, Early load use, causing an initial excessive wear of engine parts. The following provisions should be observed within the next period of the new car: the first 1) cleaning the car, check the connection and fastening of each part; Check the engine, clutch manipulation system, transmission, divider, drive bridge, steering, and insufficiently added, and check that there is no oilproof phenomenon in each portion; Check that the work system is normal, there is no leakage phenomenon at each pipe joint; 6) Check whether the electrical equipment, lights and instrumentation work is normal.
The assembly of the ninth spare tire and the spare tire of the EQ2102 are mounted between the cab and the carriage, and the manual hydraulic lifting mechanism is disassembled. The mounting and removal method is as follows: 1, when the handle is in a vertical position, the cab will rise. At this time, if you want to remove the spare tire, you will first remove the two fixtures of the spare tire frame. If the fetal frame is pulled freely by hand: 2, when the handle is in the horizontal position, the cab offers the fetal rack to lift it. Restore the spare tire, and then secure the spare tire frame with a fixed nut.
