Dongfeng 162 protective assault truck - failure and exclusion - auxiliary start

Auxiliary start

If the battery's battery loss cannot be started, the start can be performed by starting the capacitor switch or auxiliary starting cable and a sub-trunk socket.

Use start capacitance

See the operational steps of the start capacitor charging switch on page 42.

Start using the starting cable

1. Open the side startup socket of the two cars;

2. Connect the starting socket of the two cars with the starting cable;

3. Wride the power supply switch of the two cars to the \"sub-start \" position;

4. Check if the cable is connected firm, whether the circuit is turned on;

5. Start the engine of the normal vehicle;

6. Start failover, it may be necessary to repeatedly start a few times to complete. If the start time exceeds 30 seconds, the car can't start, stop for a few minutes and then start the next start;

7. If the car starts success, the two cars should be idled for a few minutes, charge the battery;

8. Remove the auxiliary starting cable, install the lid of the stroller socket.

Low temperature starting difficulties

In the cold environment, when the vehicle is difficult to start, see the operational requirements for low temperature starting in the cold area in the cold area. If you still can't start, check the following items to check:

1. Check if the battery lights are sufficient

2. Check if the intake preheating indicator is on the low temperature starting

3. Check if fuel in the fuel tank and pipeline wax

4. Check engine coolant liquid fluidity

5. Check if the liquid heater is working properly

6. Check if the start capacitor work is normal

7. Check if the engine is working properly

This article is transferred from: Dongfeng Urban Special Car Co., Ltd. -\"CSK162 Protective Authority User Maintenance Manual (Trial)\"