Views: 3 Author: Site Editor Publish Time: 2021-08-04 Origin: Site
Starting method when the cab is turned out
The parking brake handle is turned to the braking position and turn the key to the position of \"on \".
The gear joystick is in the neutral position. Plug the wheels with triangles.
Turning your driving (see page 30) according to the prescribed security operation procedure (see page 30).
Press the engine sub-start button to start.
When the engine is stopped, it must be used to use the engine to turn off the deposit. After the engine is turned off, then the porst from \"on \" to \"OFF \".
Warning:
When the engine is running in the case of the cabling, do not touch the gear joystick.
When the engine is running, the cab is strictly prohibited.
Engine use precautions
To ensure proper use of the EQB series engine, please pay attention to the following:
In order to ensure normal combustion of the engine, the air in the fuel system should first be discharged when the engine is difficult.
The basic engine only ensures the cold start temperature of -10 ° C, and the altitude is less than 2000m; the temperature of the temperature below -10 ° C must be selected with an intake heating device, and strictly use the appropriate local climate. Conditions of lubricating oil, fuel and antifreeze.
Users must not adjust any parts of the high pressure oil pump, especially high idle screws to avoid serious damage to engine and automotive speed.
To ensure that steam leads out the discharge of the gas and the gas, to ensure the seal of the cooling line, prevent the system from inhaling of air, resulting in a decrease in flow. Closely note that the coolant temperature cannot exceed the limit. If the limit is exceeded, the reason should be downtime.
Usually, it should be maintained in strict accordance with the standard.
This article is reproduced from: Dongfeng Motor Company - \"Dongfeng EQ2102 / 2102G Series Off-road Motor User Manual\"
