Views: 8 Author: Site Editor Publish Time: 2021-08-13 Origin: Site
Auxiliary power start
Due to the powerless battery of the battery, the engine is difficult to start, in order to start the vehicle available auxiliary power supply. Connection program:
1. Will the engine with a good battery vehicle flameout.
2. One end of the stretcher cable (red) is connected to the no-battery positive electrode terminal, and the other end is connected to the positive electrode terminal of the electric storage battery. One end of another stalker cable (black) is connected to the negative terminal of a good battery, and the other end is connected to the chassis frame equipped with an electric storage battery, and must be allowed to stay away from the battery.
3. After the stiffenser cable is connected, the vehicle engine without the electric storage battery is started. When the temperature is too low, the engine of the normal vehicle is operated by minutes, and the engine of the actuator vehicle is then started.
4. After the engine is started, the cable is removed in the reverse cable.
1, there is electric storage battery
2, no electric storage battery
3, frame
Check tyre air pressure and tread
Check if the pneumatic gauges are required to meet the specified requirements, and it is insufficient to be inflated.
Check tyre There is a foreign body hanging on the tread, and the foreign matter attached to it will be removed.
Check the depth of tread pattern.
Road condition | Short-range soft pavement | Off-road driving | Highway |
tyre air pressure (KPA) | 450 | 350 | 200 |
This article is reproduced from: Dongfeng Motor Company - \"Dongfeng EQ2102 / 2102G Series Off-road Motor User Manual\"