Views: 13 Author: Site Editor Publish Time: 2021-07-28 Origin: Site
Arrangement of instrumentation and manipulation
1. Blowing box (see page 28) | 6. Brake pedal | 11. Windshield Washing Tank | 16. Dashboard (see page 5) |
2. Idle adjustment knob (see page 18) | 7. Light composite switch (see page 17) | 12. Ventilation (see page 24) | 17. Windshield scraper and scrubber switch (see page 15) |
3. Exhaust brake switch (see page 14) | 8. Accelerate pedals | 13. Equid box (see page 26) | 18. Preheating the damper (see page 18) |
4. Clutch road board | 9. Transmission joystick (see page 21) | 14. Clutch oil storage tank (see page 62) | 19. Preheating switch (see page 18) |
5. Speaker button (see page 15) | 10. Self-locking switch (see page 18) | 15. Quartz bell (see page 27) |
Seat
Driver seat
Hold the front and rear regulatory rods before and after, adjust the front and rear position, and relax the seat lock.
Improve the backrest angle adjustment rod, adjust the angle of backrest, and lock the angle while relaxing.
The back-shaped adjustment knob will turn forward, adjustable back shape, the adjustment knob, and two gear positions.
The upper and lower moving pillows can adjust its height.
Front and rear adjustment rod 2. angle adjustment rod 3. Shape adjustment knob 4. Pillow
Assistant seat
Pull the seat back angle adjustment tie rod up to adjust the back to the desired angle, and relax the rod to lock the back.
Intermediate seat
The intermediate seat is a fixed seat, and the backrest can be folded forward. Rear passenger seat (for EQ2102)
The EQ2102 rear passenger seat is a passage, without any adjustment. The eq2102g is rosinous as a sleeper.
This article is reproduced from: Dongfeng Automotive - \"Dongfeng EQ2102 / 2102G Series Off-road Motor User Manual\"