Dongfeng EQ2102 Series Off-road Motor User Manual - Structure and Operation - Special Device

Special device

Wingers and pulps (optional)

The winch and the pulley can be saved, mutually rescued or other uses when necessary.

0. Separation 1. Joint

Wire rope

1. Manrate the tube to the \"1 \" position, engage the drum.

2. Start the engine in the idle position.

3. Put the clutch pedal and turn the power switch to the position of \"positive \".

4. Slowly loosen the clutch pedal, and the wire rope can be released. If the striker switch is in the \"empty \" position, the drum is placed in the \"separation \" position, and the wire rope can also pull out.

1. Practice output, winch drum, hire wrap wire rope

2, idle

3, strike power, winch drum relax wire rope

Note:

1. Before using it, check whether the wire rope is intact, reliable, and strictly forbidden to use the damaged wire rope.

2. When the wire rope is released, the throttle is not too large, and the other person must pull the wire rope slowly to the tractor and lift the hook.

This article is reproduced from: Dongfeng Motor Company - \"Dongfeng EQ2102 / 2102G Series Off-road Motor User Manual\"